Service Mode

MENU SERVICE CODE is a code to enter into a state of "SERVICE MODE". in terms of reparations television ..There are installments Ways, Including by using the code numbers or letters or a combination of both .. another way is to use hardware tricks by men-short/jumper moment at the point / or switch antecedent Provide (sharp, panasonic, Thomson, Phillips, etc.).
Some I will from here give way / code to open the service menu of Some distinguished public television brands circulating INDONESIA tv output .. of course the aircraft starting in 2000/01 Until now, Because most manufacturers only modify its features alone.

TOSHIBA : REMOTE IN PRESS MUTE ONCE, THEN PRESS AND HOLD MUTE AGAIN IN + MENU TV. REPEAT FOR NEXT PROCESS
Diremote MENU PRESS 4,7,2,5-PRESS Figures
PRESS VOL (-) IN TV-PRESS AND HOLD NUMBER 9

SANYO : MENU IN REMOTE + TV VOLUME UP

LG Flatron : PRESS OK diremote + OK TV or the MENU ON MENU IN REMOTE + TV

TCL : PRESS DISPLAY (OSD) diremote + VOLUME DOWN IN TV, hold 3 seconds


PHILLIPS : POSITION standby TV, PRESS 0,6,2,5,9, MENU

Polytron : POSITION standby TV, PRESS AND HOLD MENU ON REMOTE TO TURN ON TV INPUT CODE NUMBER 1013.

PANASONIC : SHORT (conn Instantaneous) PIN 'FA-1' TO 'FA-2' OR TP-8 TO GROUND
PANASONIC TX SERIES: PRESS VOL (-) IN TV + OSD

SHARP : SHORT Legs (PIN) 6 AND 7 PIN ON Instantaneous MCU IC (TDA 98XXX). SHORTKAN BACK TO EXIT

SHARP EXPRESSION : Connect clamping OR TWO WIRE / JUMPER J800 (ADA adjacent TUNER) PCB Which Provided HAS A HOLE AND TWO JUMPER parallel.


CRYSTAL : POSITION standby TV, PRESS VOLUME UP + DOWN ON TV AND HOLD ON VOLIME simultaneously hinga TV

.
Akari: SLEEP IN PRESS REMOTE + TV MENU

SAMSUNG : POSITION IN REMOTE STANDBY PRESS: MENU - PSTD - MUTE - POWER ON
Samsung Plano : Outstanding STANDBY, PRESS ON REMOTE: DISPLAY-MENU-MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100 : STANDBY-DISPLAY-MENU-MUTE-POWER
OR: STANDBY-MUTE-1-8-2-POWER ON

.
AKIRA, FUJITEC, BOOMBA :
BRAND CHINA AND SOME OTHERS THAT USE THE PROGRAM TYPE Which IC LC8632XX SERIES : PRESS MENU IN REMOTE twice - RECALL (Q. VIEW) - MUTE.

TV CHINA OTHER ( KCL, MITOCHIBA, BAZZOMBA ) PRESS VOLUME UP IN TV REMOTE NOL.TEKAN RECCAL AT ONCE, PRESS AND HOLD VOLUME (-) IN TV simultaneously WITH PUSH BACK IN REMOTE RECALL .. repeated the process to enter the sub menu to a position next to exit service menu.

Aiwa : MENU BUTTON ON THE REMOTE serve THERE IN THE VOLUME BUTTON (+), unloading NOTICE.

JVC : PRESS AND HOLD simultaneously + MUTE OSD
PRESS AND HOLD OR OSD + PICTURE


HITACHI : PRESS AND HOLD BUTTON AVDI TV, POWER SWITCH ON TV

SONY : STANDBY-OSD - 5 - VOL (-) - POWER ON

RCA / THOMSON : PRESS AND HOLD BUTTON IN VT TV + POWER SWITCH ON TV



Some brands CHINA TV Also there is a service menu button on the remote orsinil

Perhaps there is the other input from friends?

Terkait Lainya :

SERVICE_MODE